Bolt-Down Table Bases: When to Anchor Restaurant Tables

Buyer’s Guides

Bolt-Down Table Bases: When to Anchor Restaurant Tables and How to Specify Them

Request a Quote / Samples

By Burke Schechtel, Founder, President & CEO, Designform Furnishings · Designing and building commercial seating since 2007 · Updated November 2026

Most restaurant tables stand on their own. A heavy cast iron or steel base, sized to the top and set on leveling glides, keeps a table steady and still lets staff move it, push two-tops together for a party or clear the room for cleaning. Some tables, though, should never move. A table between two booth seats, a row of food court four-tops, a bar-height ledge in a sports bar or a concession table that roller bags bump all day are all better off anchored to the floor.

That is what a bolt-down table base is for. This guide covers when to bolt a table down, when not to, how bolt-down and freestanding bases compare, and what to plan before installation. For base sizing in general, see our table base size chart. To browse bases, see restaurant table bases.

What is a bolt-down table base?

A bolt-down table base has a column that rises from a mounting plate fastened directly to the floor, rather than from a wide freestanding foot. Because the floor does the work of holding the table up, the base doesn’t need a large spread to resist tipping. The mounting plate and fasteners are usually hidden under a small cover, so the base reads as a single column coming out of the floor.

Our B900 bolt-down base is a typical example. It is all steel, with a 3″ steel column and an 8″ round steel bolt cover, in black powder coat or chrome. It comes in dining, counter, bar and custom heights. A single base carries a top up to 42″ round, and multiple bases can be used under larger tops. It is part of our quick ship program and is usually in stock.

Bolt-down vs. freestanding table bases

Neither type is better in every room. The right choice depends on whether the table ever needs to move.

FactorBolt-down baseFreestanding base
StabilityFixed to the floor; cannot tip or walkDepends on base spread, weight and the floor
WobbleNone once anchored on a solid floorLeveling glides correct small floor variations
FlexibilityFixed layout; tables cannot be pushed togetherTables can be moved, joined and stored
CleaningSmall footprint; floor cleans around one columnTables can be moved for deep cleaning
Base sizeCompact floor plate under a small coverWider spread needed to resist tipping
InstallationPlanned with the floor; a contractor drills and anchorsSet in place on delivery
Best forBooths, banquettes, food courts, bar ledges, countersDining rooms, patios, event spaces, rooms that change

Many restaurants use both: bolt-down bases at booths, banquettes and counters, and freestanding bases on the open floor where tables are rearranged every night.

Where bolt-down table bases make sense

SettingWhy anchor the table
Booths and banquettesThe table sits between fixed seats and should never move. A single column keeps legroom clear for guests sliding in.
Mall food courts and food hallsHigh turnover, nightly cleaning and guests who lean, drag and push. Anchored tables stay in their rows.
Airport restaurants and concessionsRoller bags and carry-ons knock into tables all day. Bolt-down tables keep aisles and accessible routes clear.
Bar ledges, drink rails and high-topsTall tables are easier to tip. Anchoring bar-height tables in busy bars and sportsbooks is common.
Counters and window barsNarrow tops on a single column stay aligned with stools, especially when the stools are bolted down too.
Exposed patios and rooftopsWind can move tables and umbrellas. Anchored bases keep outdoor tables in place where codes and the landlord allow.

For more on these settings, see our pages on mall food court seating, food hall furniture, airport restaurant furniture and the airport concession furniture checklist.

When not to bolt a table down

Anchoring a table takes away flexibility, so leave tables freestanding when:

  • The room changes. Dining rooms that host private parties, banquets or brunch layouts need tables that push together and move. See the table seating chart for flexible two-top and four-top setups.
  • The floor can’t be drilled. Some leases, historic buildings and finished floors don’t allow anchors, and in-floor heating, conduit or post-tensioned slabs may limit where holes can go.
  • The layout isn’t final. Bolting tables before the plan is settled locks in mistakes. Mark the floor, test the layout with the real chairs and confirm clearances first.
  • Accessible seating isn’t settled. Accessible tables must sit on an accessible route with clear floor space and knee clearance. Confirm those positions with your architect before anchoring anything. See the ADA restaurant seating guide.

How to size a bolt-down table base

Sizing a bolt-down base is mostly about the top. Because the base is anchored, its job is to support the top without flexing, not to keep the table from tipping.

  • Check the maximum top size. Every bolt-down base has a rated maximum. On the B900, a single base carries up to a 42″ round top. Larger rounds, long rectangles and communal tables need two or more bases.
  • Mind the overhang. A large top on a single column can flex when a guest leans on the edge. If a rectangle is longer than a square, use two bases, as you would with a freestanding 2-prong setup.
  • Pick the height. Dining height suits standard chairs and booths, counter height suits counter stools, and bar height suits bar stools. Our bar vs. counter height guide explains the difference.
  • Match the stools. If the table sits at a counter or bar ledge, consider bolt-down stools too, so stools and tables stay aligned. See the swivel and bolt-down bar stools guide.

Planning the installation

Bolt-down bases are installed on site by a contractor or installer, so plan them with the floor, not after it.

  1. Lock the layout. Confirm table positions, aisle widths and accessible seating on the floor plan. Our restaurant seating layout guide covers space per seat and aisles.
  2. Know the floor. Concrete slabs, wood subfloors and raised floors each need different fasteners. The installer or contractor should choose anchors suited to the floor and confirm what is under it before drilling.
  3. Coordinate with the floor finish. Tile, terrazzo, polished concrete and wood all affect drilling and how the bolt cover sits. Decide whether bases go in before or after the finish.
  4. Mark and test. Mark each base location, set the tops loosely and walk the room before anything is drilled.
  5. Plan for replacement. Keep model numbers, heights and finishes on record so a damaged top or base can be replaced without moving the anchors.

Like all Designform tables, bases ship separately from the tops, with mounting hardware for attaching the top. Prefinished table tops can ship in as little as 2–3 days, and tops finished after order typically take 1–2 weeks. See table tops and our table top materials guide.

Finishes for high-traffic floors

Bolt-down tables are usually in the hardest-working parts of a room, so the finish matters. Black powder coat hides scuffs and suits most interiors; chrome reads brighter and suits diners, cafés and retro concepts. Ask your rep for finish samples before you order, and see our finish options.

Frequently asked questions

What is a bolt-down table base?

A table base whose column rises from a plate fastened directly to the floor, instead of a wide freestanding foot. The floor holds the table steady, so the base can be compact and the table cannot tip, slide or wobble once it is anchored.

When should restaurant tables be bolted to the floor?

When a table should never move: between booth seats and banquettes, in food courts and food halls, at bar ledges and high-tops, at counters, in airport concessions and on windy patios. Tables in rooms that are rearranged for parties or events are usually better freestanding.

How big a table top can a bolt-down base hold?

It depends on the base. Designform’s B900 bolt-down base carries a single top up to 42″ round, and multiple bases can be used under larger rounds, long rectangles and communal tables. Check each base’s rated maximum on its cut sheet.

What heights do bolt-down table bases come in?

The B900 bolt-down base comes in dining, counter and bar heights, plus custom heights for special conditions such as raised platforms or ledges.

Who installs bolt-down table bases?

A contractor or installer on site, who chooses anchors suited to the floor and confirms what is under it before drilling. Plan locations with the floor plan and floor finish, and test the layout before anything is drilled.

Are bolt-down table bases in stock?

The B900 bolt-down base is part of our quick ship program and is usually in stock. Quick ship items ship in 2–3 weeks, and can ship in as little as 2–3 days if needed.

Do bolt-down tables meet ADA requirements?

They can. A single-column bolt-down base leaves open knee space, which helps meet the ADA’s 27″ minimum knee clearance at accessible tables. Check the table height (28″ to 34″ for accessible dining surfaces) and clear floor space at each accessible seat.

Related guides

Shop for this project: B900 bolt-down base, restaurant table bases, table tops, complete tables and stools.

Planning tables that stay put?

Send us your floor plan and table sizes. We will recommend bases and tops, send pricing and finish samples, and connect you with your local Designform rep.

Request a Quote / Samples